How to Format a Computer with Windows XP

1. The first step in learning how to format a computer with Windows XP or 2000, is to insert Windows CD and restart your computer.
2. Your computer should automatically boot from the CD to the Windows Setup Main Menu.
3. At the Welcome to Setup page, press ENTER.
4. Press F8 to accept the Windows XP Licensing Agreement.
5. If an existing Windows XP installation is detected, you are prompted to repair it. To bypass the repair, press ESC.
6. Use the ARROW keys to select the partition or the unpartitioned space where you want to create a new partition. Press D to delete an existing partition, or press C to create a new partition.
7. Type the size in megabytes (MB) that you want to use for the new partition, and then press ENTER, or just press ENTER to create the partition with the maximum size.
8. Select the format option that you want to use for the partition (Recommended: NTFS), and then press ENTER.
9. After the Windows Setup program formats the partition, follow the instructions that appear on the screen to continue installing Windows.

How to Format a Computer with Windows 95, 98, or ME

To reinstall Windows, you will need a Startup Diskette and a Windows Installation CD.

Download the Startup Diskette Creator
Note: We recommend using the Startup Diskette available on this page. Other Windows Startup Diskettes may not work with the following steps.

1. Once you have your Startup Diskette, insert it into the floppy drive and restart your computer.
2. Select option #1 - Start the computer with CD-ROM support.
3. After a minute or so, you will see "A:>_".
4. Type "fdisk" and press Enter.
5. If asked to enable large disk support, select Y for Yes. (Note: Some versions of Windows 95 may not be compatible with large disk support. Select N here if it does not support the FAT32 file system.)
6. Select Option #1 - Create DOS partition or Logical DOS Drive.
7. Select Option #1 - Create Primary DOS Partition.
8. The drive integrity will be verified.
9. Unless you are planning to make multiple partitions, select Y when asked if you want to use the maximum available size for the partition and to make the partition active.
10. The drive integrity will be verified again.
11. When completed press the Esc key to exit fdisk.
12. Without removing the floppy disk, press the reset button on the computer or press the keys Ctrl then Alt then Delete and release them together. This will restart the computer.
13. Again, select the option to Start the computer with CD-ROM support.
14. When you see A:>, directly above it is a message about your CD-ROM drive. It will tell you the letter assigned to your CD-ROM drive, take note of it.
15. At the A:>, type "format C:" and press Enter.
16. Press the Y key then the enter key when asked if you want to proceed with the format.
17. The format will probably take some time, so be patient.

المصدر (http://www.whitecanyon.com/how-to-format-computer.php)